At Power World we strive ourselves on being the best.  What that means to us is to have the best customers.  We recognize that the sales process begins with the purchase of a machine, and doesn’t end there.  A good majority of our customers look at us like their powersports family and not just where they go to purchase the next item.  This culture is because of the passion we all have for powersports and the comradery we have with our powersports family, aka, our customers.  Find out what sets us apart from everyone else and call today.

CLIMBING CHAMPION

Test your mettle and finally conquer the last mile: The Maverick™ X3 X rc Turbo R is the ultimate factory rock-crawling side-by-side vehicle for running over obstacles and leaving rivals at the bottom of the heap.

72" width of ultimate performance

EXTEND YOUR REACH
How far will our engineers push the envelope? At 72-inches of width, the X3 X rc Turbo R maximizes its race-winning geometry with high-performance suspension, wheels, and tires chosen to deliver complete control. If you’re craving a blast across wide-open terrain and routinely put stability to the test, this is the setup for you.

Industry leading 172 hp turbocharged and intercooled Rotax® ACE engine

JUST BEASTLY
Meet the king of side-by-side engines, the precision-engineered, industry-leading triple-cylinder Rotax ACE engine. Its 172 horsepower* at 7,250 RPM and 124 lb-ft of torque at 6,500 RPM give searing speed, no matter the terrain. Tell your friends: 0-60 MPH in just 4.4 seconds*.
*Based on BRP internal testing.

Lockable Front Differential

Smart-Lok technology
For next-level traction to conquer the roughest terrain, Can-Am-exclusive Smart-Lok™* technology is the new benchmark. A true full lockable on-the-fly front differential with electronically-controlled automatic modes, or with the simple press of a button that offers preset, intelligent calibrations for your type of riding. Using multiple input sources, "Smart mode” will instantaneously engage locking with the right load at the right moment. Never before have riders been given maximum traction while retaining low-speed maneuverability.
*Smart-Lok was developed in conjunction with TEAM Industries, a market leader in the drive train industry

Advanced airflow dynamics

WIND THAT WORKS
With an intake and exhaust tuned to maximise power, efficiency, and throttle response, the Can-Am Maverick X3 will never be starved for performance. Three oversized, out-of-the-way intakes feed the engine and the CVT with clean air and keep temperatures low, with a sport exhaust out back to let the Rotax ACE engine roar.

Ultra efficient and lightweight chassis

CLEVERLY CAGED
The Maverick X3 features an ultralight, rigid chassis made of state-of-the-art Dual-Phase 980 steel. So? Figure 53% better torsional stiffness and still 20% lighter than its closest competitor.

QRS-X transmission

WIND IT OUT
A compact, high-performance QRS-X CVT has been calibrated to work with the turbo to virtually eliminate lag, without shifting or torque interruption to slow you down. Its large drive—a long, wide, and thick belt—is our most robust three-roller pulley design yet.

TTX suspension with industry-leading travel and arched lower links

PROOF IN THE POUNDING
BRP's four-link TTX suspension with 24-in of travel features a trophy truck-like trailing arm and three links dedicated to controlling camber while delivering optimal geometry at all times, even during extended wheel travel. The result? Unparalleled power transfer to wheels, virtually no bump steer, precise steering response, and more confidence at higher speeds.

Ergo-Lok† cockpit with four-way adjustable seats

DRIVER-FOCUSED
You'll find everything is in its right place, from revised pedals that allow better foot control over challenging terrain and a flat-bottom steering wheel that tilts up or down 25° to steer with precision. Four-way adjustable seats – 2 inches in height and 6 inches in slide, ease of accessorization, and integrated wiring—allow it to truly adapt to the line ahead.

Race-inspired protection

WITH YOU ALL THE WAY
Retractable 4-point harness, standard. Half doors and aluminum roof, standard. The front and rear tow anchors and front intrusion bar are also standard, for the most complete protection when exploring and bouldering at the limit.

Trademark Can-Am DNA with next generation design

UNMISTAKABLY FIERCE
The Maverick X3's intensity comes from a mix of performance-driven mechanical and structural design, from its signature LEDs to its advanced cockpit. Here, designers have selected a futuristic bright blue as the hero color for the Maverick X3 X rc Turbo R.

Highly responsive 30-in Maxxis Liberty tires

FOR THE TOUGH STUFF
Considering the other improvements to the Maverick, the latest 30-inch Maxxis Liberty Tires on 14-inch cast-aluminum beadlock rims could be seen as a minor upgrade, but their aggressive tread and rugged construction are the key to pushing the X3's capabilities further than ever on very rough ground.

Fully adjustable FOX 3.0 PODIUM RC2 remote reservoir shocks with bypass

CHALLENGE IT
The Maverick X3 X rs is equipped with fully-adjustable FOX 2.5 Podium RC2 Piggyback shocks with bypass and dual-speed compression and rebound (front), and class-leading FOX 3.0 Podium RC2 shocks with remote reservoir with bypass and dual-speed compression and rebound (rear) for ultra-precise performance.

High Molecular Weight skid plates for maximum protection

LIKES IT ROUGH
With a full compliment of Heavy-Duty protection gear, from HMW skid plate to UHMW rock sliders, to differential HMW protection and HMW suspension armour, the X rc Turbo R has overbuilt HMW parts where you need them most.

High-performance winch

RECOVER WITH EASE
An 4,500-lb (2,041 kg) winch with synthetic rope positioned on the front bumper gives the X rc the power to pull itself—and your rivals—out of tough terrain.

***Monthly payment is just an example of payment with approved credit and does not include any taxes.  Taxes can be financed, however for this given example your taxes would be your down payment.   Give example is at 84 monthly payment’s at an interest rate of  7.99%.  This is just to give an idea and does not represent a guarantee to finance.  Given example is with average credit upon approval.  Most applicants will qualify for better rates or even manufacture promotional financing when available.  If an applicant does not qualify for conventional financing, we do have some other options for first time and second chance buyers.  Call for details.